MQTT Alarm Control Panel 0.6.8 [free]

MQTT Alarm Control Panel
MQTT Alarm Control Panel is an alarm control panel for use with home automation platforms that support MQTT messaging. The application was originally built for Home
Assistant'sMQTT Manual Control Panel. However, the application can be used with any home automation platform that supports the MQTT messaging protocol.
The alarm control panel acts as an interface for your home alarm system and allows for two way communication using MQTT. You can set the alarm state to away or home, or
disarm the alarm using a code. Your home automation system controls the sensors or automation that triggers the siren or notifies users of possible intrusion.
The alarm control panel has some other nice features such as a weather forecast, a screensaver mode, capture and send images on alarm deactivation, and the ability to load
home automation web page. The alarm panel is open source and available on GitHub, there is also a version that runs on a Raspberry Pi.
The alarm panel is designed to be used as a dedicated device which runs continuously in full-screen mode. Therefore, it operates in the landscape position for the best
user experience.
For the complete setup instructions and additional information, please visit the Project Home Page.Home AssistantHome Assistant's MQTT Manual Alarm Control PanelProject's Home PageRaspberry Pi Version
Support: [email protected]

• 01/21/2018: MQTT Alarm Control Panel 0.6.8
• Report a new version